Practical Node-Red in smart home automation DIY-Part1 – Free Udemy Courses

[Experiments/ Practicals ] Here is the Ultimate Smart Home Tech Tour for KinCony’s IoT module DIY.  We will produce a series of video tutorials using the IBM Node-Red DIY software. the Node-Red is open source. I find it’s very easy to use, with almost no need to write any program code. Step by step, it’s very easy to DIY. We will continue to develop IoT and smart control systems and make video lessons around the world.

lesson1 will tell you how to install raspberry pi 4 OS by sd card. When install completed, the system will have the Node-Red software.

Lesson 2 will tell you how to turn ON/OFF a relay switch by node-red Home kit node work on Raspberry Pi 4 . you can control the relay by Home kit and Siri via iPhone and iPad.

lesson 3 shows how to configure Node-RED to update the wall switch button status on an apple iPhone or iPad home kit by Raspberry Pi 4 with Linux OS and how to start creating home automation projects using TCP/IP socket, like ethernet or WiFi relay module.

lesson 4 shows how to configure Node-RED for website applications by dashboard on iOS and Android and PC by Raspberry Pi 4 with Linux OS and how to start creating home automation projects using TCP/IP socket, like ethernet or WiFi relay module.

lesson5 shows how to configure Node-RED for kinds of digital and analog sensor monitoring by dashboard by Raspberry Pi 4 with Linux OS and how to start creating home automation projects using TCP/IP socket, like ethernet or WiFi relay module.

lesson 6 shows how to configure Node-RED control device by infrared signal by dashboard by Raspberry Pi 4 with Linux OS and how to start creating home automation projects using TCP/IP socket, like ethernet or WiFi relay module.

Lesson 7 shows how to configure Node-RED control device by RF signal (radio frequency) by apple home kit by Raspberry Pi 4 with Linux OS and how to start creating home automation projects using TCP/IP socket, like ethernet or WiFi wireless smart home module.

lesson 8 shows how to configure a Node-RED control device with 8 channel dimmer controller by apple home kit by Raspberry Pi 4 with Linux OS and how to start creating home automation projects using TCP/IP socket, like ethernet or WiFi wireless smart home module.